Description
- 1x MicroMod Main Board - Single
- 3x Phillips #0 M2.5x3mm Screw
- 3.40 x 2.90 inches
- Input Voltage Range
- 5V via USB C Connector
- ~3.7V to 4.2V via LiPo Battery Connector
- Built-in Resettable PTC Fuse (Rated 5V/2A)
- AP7361C 3.3V/1A Voltage Regulator
- AP7347DQ 3.3V/500mA Voltage Regulator (for Qwiic-Enabled Devices)
- Integrated MCP73831 Single Cell LiPo Charge Circuit
- 500mA
- Ports
- 1x USB Type C Connector
- 1x 2-Pin JST Connector
- M.2 Connectors
- 1x MicroMod Processor Board
- 1x MicroMod Function Board
- 2x Qwiic Enabled I2C
- 1x MicroSD Card Socket
- 1x SWD 2x5 Header
- Built-in MUX for UART1
- Buttons
- 1x Reset
- 1x Boot
- LEDs
- 1x VIN
- 1x 3.3V
- 1x Qwiic 3.3V
- 1x CHG
- Plated Through Holes
- GND, SEL, TXO, RXI, RST, 5V (MEAS), VBAT, 3.3V (MEAS)
- Jumpers
- USB SHLD, 5V MEAS, 3.3V MEAS, PTC, 3.3V EN, VIN LED, 3.3V LED, Qwiic 3.3V LED, I2C, Battery Voltage Divider
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.