SparkFun OpenLog Artemis (w/o IMU)

Sparkfun ElectronicsSKU: RB-Spa-2116
Manufacturer #: DEV-19426

Price  :
Sale price $44.95

Shipping calculated at checkout

On Demand See due date

This is an On Demand item and is not normally stocked. We will order it for you along with our next purchase from the supplier.

* Delays depend on the order frequency from each supplier and the approximate arrival date is indicated in the due date. Returns are not accepted on On Demand and Clearance Items except when they are found defective, in which case the product may be repaired or replaced at RobotShop's discretion.

Payments and Security

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Venmo Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Description

  • SparkFun OpenLog Artemis (w/o IMU)
  • Offers an open-source data logger
  • Designed for users who just need to capture a lot of data to a CSV
  • Comes preprogrammed to automatically log GPS, serial data, and distance sensors
  • Highly configurable over an easy-to-use serial interface
  • Automatically detects, configures, and logs Qwiic sensors

The SparkFun OpenLog Artemis (w/o IMU) is an open-source data logger that comes preprogrammed to automatically log GPS, serial data, and various pressure, humidity, and distance sensors. All without writing a single line of code! OpenLog Artemis, or "OLA," automatically detects, configures, and logs Qwiic sensors. The OLA is specifically designed for users who just need to capture a lot of data to a CSV and get back to their larger project.

The OpenLog Artemis is highly configurable over an easy-to-use serial interface. Simply plug in a USB-C cable and open a terminal at 115200 bps. The logging output is automatically streamed to both the terminal and the microSD. Pressing any key will open the configuration menu. The OpenLog Artemis automatically scans, detects, configures, and logs various Qwiic sensors plugged into the board (No soldering! No programming).

  • 1x SparkFun OpenLog Artemis (w/o IMU)

  • Artemis Module (Cortex-M4F based Apollo3 microcontroller): Configurable via CH340E and Artemis Firmware Upload GUI
  • Serial: Logging speeds up to 500000 bps
  • 1x microSD socket: Support for FAT32 and older FAT16 formats up to 32GB with power control
  • RTC with 1mAhr battery backup
  • LEDs: Power | LiPo charge indicator | Serial Tx and Rx | Status

Operating voltage range

  • 3.3V to 6.5V (via VIN with optional external power switch)
  • 5V with USB (via 5V or USB type C)
  • 3.6V to 4.2V with LiPo battery (via VBATT or 2-pin JST)
  • Built-in MCP73831 single-cell LiPo charger
  • Minimum 450mA charge rate
  • 3.3 V (via 3V3)

Current consumption

  • ~20 mA (Run)
  • ~80 µA (Sleep)
  • ~18 µA (Deep Sleep - regulator shut down)

Ports

  • 1x USB type C
  • 1x LiPo battery enabled
  • 1x Qwiic enabled I2C with power control
  • 1x SWD 2x5 header
  • 4x Analog-to-digital: 14-bit, up to 1900Hz, 2V max (3.3V compatible)

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Estimate shipping

You may also like