Description
- 1x DVL A50 (standard performance) with pre-installed WetLink Penetrator, JST GH connectors, and spade connectors
- 1x M10 Penetrator nut
- 1x Penetrator O-ring
- 1x RJ45 to JST GH adapter
- 1x Mounting Bracket

- Device Diameter: 66 mm
- Device Height: 25 mm
- Cable Length: 950 mm External, 350 mm Internal (data), 155 mm Internal (power)
- DVL Mounting Screw Size: M3x 0.5 x 5 mm
- Mounting Bracket Screw Size: M5x0.8 x 16 mm
Performance
- Transducer frequency: 1 MHz
- Transducer setup: 4-beam convex Janus array
- Transducer beam angle: 22.5 degrees
- Ping rate: 4 - 15 Hz (adaptive to altitude)
- Sensor assist: Integrated AHRS
- Min altitude: 5 cm
- Max altitude: 50 meters (>35 m is dependent on seabed conditions, salinity levels, etc.)
- Max velocity: 3.75 m/s
- Velocity resolution: 0.1 mm/s
- Long term accuracy: ±1.01 % (Standard version), ±0.1 % (Performance version)
Electrical
- Input Voltage: 10 - 30 Vdc
- Average power: 4 W
- Peak power: 35 W
- Physical interface: 3m cable with interface module, 8 wires (Power / Ethernet / Serial)
- Indicator: Status LED (Power, Lock)
- Communication: Ethernet & Serial (UART 115200 baud)
- Protocols: Water Linked API and PD6
Mechanical
- Depth rating: 300 m
- Material: PEEK (housing), Stainless Steel 316 (back plate)
- Operating temperature: -5 to 55 °C
- Weight (Air): 0.17 kg
- Weight (Water): 0.105 kg
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.