Description
- 1x Waveshare 10.3" e-Paper E-Ink Display HAT for Raspberry Pi, 1872×1404, Black/White, 16 Grey Scales, USB/SPI/I80
- 1x e-Paper IT8951 Driver HAT (B)
- 1x 10.3" e-Paper Adapter
- 1x 40PIN FFC (same side contact)
- 1x USB Type A Plug to Micro B Plug Cable
- 1x PH2.0 20cm 8PIN
- 1x RPi Screws Pack (2pcs)
- Outline dimensions: 216.70 x 174.40 mm
- Display size: 209.66 x 157.25 mm
- Resolution: 1872×1404 pixels
- Viewing angle: Greater than 170°
- Display color: Black and white
- Grey scale: 2-16 (1-4 bit)
- Communication: USB/SPI/I80
- Display panel: E-paper
- Experience: Paper-like
- Environment: Requires ambient light
- Display type: Passively reflective
- Refreshing: Supports partial refresh
- No backlight; retains last content when powered down
- Ultra-low power consumption; power needed only for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header; supports Raspberry Pi series boards
- USB/SPI/I80 interface for connecting with controller boards like Raspberry Pi/STM32
- Includes development resources and manual (examples for Raspberry Pi/STM32)
- Operating voltage: 5V
- Full refresh time: Less than 1 second
- Refresh power: 1.2W (typical)
- Dot pitch: 0.112 × 0.112mm
- Standby current: 0.1W (typical)
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.