Description
- 1x Waveshare 10.3" Flexible E-Ink Display HAT for Raspberry Pi, 1872×1404
- 1x 10.3-inch e-Paper (D)
- 1x e-Paper IT8951 Driver HAT (B)
- 1x 10.3-inch e-Paper Adapter
- 1x 40-pin FFC (same side contact)
- 1x USB Type A plug to Micro B plug cable
- 1x PH2.0 20cm 8-pin
- 1x RPi screws pack (2pcs)
- Outline dimensions: 227.7 x 165.8 x 0.647 mm
- Display size: 209.664 x 157.248 mm
- Operating voltage: 5V
- Interface: USB/SPI/I80
- Resolution: 1872 × 1404
- Display color: black, white
- Gray scale: 2-16 (1-4 bit)
- Full refresh time: 450ms
- Total refresh power: 1.2W (typical)
- Total standby power: 0.1W (typical)
- Viewing angle: greater than 170°
- No backlight; retains last displayed content for an extended period even when powered down
- Low power consumption; power is primarily needed for refreshing
- Standard Raspberry Pi 40-pin GPIO extension header; supports Raspberry Pi series boards
- Includes development resources and manual (examples for Raspberry Pi/STM32)
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.