Description
- 1x Waveshare 1.3" OLED Display Module, 64×128 Resolution, SPI/I2C Interface
- 1x 1.3inch OLED Module (C)
- 1x PH2.0 7pin 20cm cable
- 30.0 x 39.5 mm
- Operating voltage: 3.3V
- Resolution: 64 × 128 pixels
- Communication interface: 4-wire SPI, I2C
- Display panel: OLED
- Pixel size: 0.15 × 0.15mm
- Driver: SH1107
- SPI control interface: Supports controller boards like Raspberry Pi, Arduino, STM32
- VCC: Power (3.3V input)
- GND: Ground
- DIN: Data input
- CLK: Clock input
- CS: Chip selection, low active
- DC: Data/Command selection (high for data, low for command)
- RST: Reset, low active
- Supports both 4-wire SPI and I2C interfaces for better compatibility and high transmission rate
- Includes development resources with examples for Raspberry Pi, Arduino, STM32
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.