Description
- 1x Waveshare 1.32" OLED Display Module, 128×96 Resolution, 16 Gray Scale, SPI / I2C Communication
- 1x GH1.25 7-pin cable
- Display Size: 26.86 x 20.14 mm
- Module Size: 34.3 x 30.5 mm
- Ultra-narrow bezel with onboard voltage translator
- Utilizes 4-wire SPI and I2C interfaces for enhanced compatibility and fast data rate
- Includes online development resources with examples for Raspberry Pi, Arduino, and STM32
- Operating voltage: 3.3V / 5V
- Display panel: OLED
- Resolution: 128 × 96 pixels
- Communication interface: 4-wire SPI / I2C
- Driver: SSD1327
- Control interface includes RES (Reset, low active), DC (Data/Command selection, high for data, low for command), CS (Chip selection, low active), CLK (Clock input), DIN (Data input), GND (Ground), VCC (Power, 3.3V / 5V input)
- Hardware connection: Compatible with Raspberry Pi and Arduino Board via SPI Interface
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.