Description
- 1x Waveshare 2.9" E-Paper E-Ink Display Module (B), 296×128, Red / Black / White, SPI
- 1x 2.9inch E-Paper Module
- 1x PH2.0 20cm 8pin
- Outline Dimensions: 89.5 x 38 mm
- Display Size: 66.90 x 29.06 mm
- Resolution: 296×128 pixels
- Viewing angle: >170°
- Display color: Red / Black / White
- Grey scale: 2
- Communication: SPI
- Display panel: E-paper
- Experience: Paper-like
- Environment: Ambient light required
- Display type: Passively reflective
- No backlight; retains last content even when powered down
- Ultra-low power consumption; power needed only for refreshing
- SPI interface for connecting with controller boards like Raspberry Pi, Jetson Nano, Arduino, STM32, etc
- Onboard voltage translator compatible with 3.3V / 5V MCUs
- Includes development resources and manual (examples for Raspberry Pi, Jetson Nano, Arduino, STM32)
- Operating voltage: 3.3V/5V
- Interface: 3-wire SPI, 4-wire SPI
- Full refresh time: 15 seconds
- Refresh power: 30mW (typical)
- Dot pitch: 0.227 × 0.226 mm
- Standby current: <0.01 µA (almost none)
- E-paper display utilizes microcapsule electrophoretic technology
- Clearly displays images/texts under lamplight or natural light
- Features nearly 180° viewing angle
- Onboard SPI control interface for connecting with controller boards like Raspberry Pi, Jetson Nano, Arduino, STM32
- VCC: 3.3V/5V
- GND: Ground
- DIN: SPI MOSI pin
- CLK: SPI SCK pin
- CS: SPI chip selection, low active
- DC: Data/Command selection (high for data, low for command)
- RST: External reset, low active
- BUSY: Busy status output, low active
- Onboard voltage translator compatible with 3.3V / 5V MCUs
- Application examples: Suitable for price tags, asset/equipment tags, shelf labels, conference name tags
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.