Description
- 1x Waveshare 5.83" E-Paper E-Ink Display Module (B) for Raspberry Pi Pico, 648×480, Red / Black / White, SPI
- 1x Pico-ePaper-Driver-Board
- 1x Standoff Pack
- Outline Dimensions: 125.4 x 99.5 mm
- Display Size: 119.232 x 88.320 mm
- Resolution: 648×480 pixels
- Viewing angle: >170°
- Display color: Red / Black / White
- Grey scale: 2
- Communication: SPI
- Display panel: E-paper
- Experience: Paper-like
- Comfortable reading: Eye care, no blue light
- Environment: Ambient light required
- Display type: Passively reflective
- Power consumption: Ultra low
- Display duration: Persists without power
- No backlight, retains last content for a long time even when powered down
- Ultra low power consumption, power required only for refreshing
- SPI interface, requires minimal IO pins
- Two user buttons and one reset button for easy interaction
- Includes development resources and manual (Raspberry Pi Pico C++ and MicroPython examples)
- Operating voltage: 3.3V
- Interface: 3-wire SPI, 4-wire SPI
- Full refresh time: 20 seconds
- Refresh power: 26.4mW (typical)
- Standby current: <0.01uA (almost none)
- Dot pitch: 0.184 × 0.184mm
- Onboard female pin header for direct attachment to Raspberry Pi Pico
- Stackable design
- Extended Pico header, allows attaching more modules for Pico
- Widely compatible driver board
- Onboard switch for use with multiple E-paper displays or selecting SPI bus
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.