Description
- 1x Waveshare MAX-M8Q GNSS HAT for Raspberry Pi, Multi-Constellation Receiver Support, GPS, Beidou, Galileo, GLONASS
- 1x GPS external antenna (b)
- 1x USB-A to Micro-B cable
- 1x RPi screws pack (2pcs)
- 1x 2x20pin female header
- 65 x 30.5 mm
- Supports concurrent reception of up to 3 GNSS satellite systems: GPS, Beidou, Galileo, and GLONASS
- Maintains low power consumption
- Supports augmentation systems: SBAS, QZSS, IMES, D-GPS
- Enhances positioning performance for service locations
- Supports A-GNSS (Assisted GNSS) for reduced first positioning time and improved acquisition sensitivity
- Features -167dBm navigating sensitivity
- Provides anti-spoofing and anti-jamming capabilities
- Supports geo-fencing
- Compatible with U-Center for easy module configuration
- Includes a standard Raspberry Pi 40PIN GPIO extension header
- Supports Raspberry Pi series boards and Jetson Nano
- Onboard USB to UART converter CP2102 for serial debugging
- Breakouts for UART and I2C interfaces for connection with host boards like Arduino/STM32
- Baud rate range: 4800~921600bps (9600bps by default)
- Supports DDC (I2C compliant) interface up to 400KHz
- Onboard battery holder supports ML1220 rechargeable cell for preserving ephemeris information and hot starts
- Includes 4 LEDs indicating module operating status
- Comes with development resources and manual for Raspberry Pi, Jetson Nano, Arduino, and STM32
- GNSS Specifications: MAX-M8Q GPS & GLONASS, GPS, GLONASS, BeiDou, Galileo
- Frequency band: 72x u-blox M8 engine channels
- Horizontal positioning accuracy: 2.5m CEP
- Maximum navigation update rate: 10Hz
- Time-To-First-Fix: Cold starts 26s, Hot starts 1s
- Sensitivity: Tracking and navigating -167 dBm
- PPS accuracy: RMS 30ns
- Velocity accuracy: 0.05m/s
- Heading accuracy: 0.3 degree
- Operational limits: Acceleration max 4g, Altitude max 50000m, Velocity max 500m/s
- Communication interface: UART (4800~921600bps, 9600bps by default), I2C (max 400KHz)
- Update rate: 1Hz (default), 18Hz (max)
- Protocol: NMEA 0183 Version 4.0 (V2.1, V2.3 or V4.1 selectable), UBX, RTCM 2.3
- Power supply: 5V
- Overall current: <40mA@5V (Continuous mode)
- Module current: 23mA@3V (Continuous mode, tracking status)
- Operating temperature: -40°C to 85°C
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.