Description
- 1x Waveshare NB-IoT HAT for Raspberry Pi (Europe, Asia, Africa, Australia)
- 1x SIM7020E NB-IoT HAT
- 1x Antenna
- 1x USB Type A plug to Micro plug cable
- 1x RPi screws pack (2pcs)
- 30.5 x 65.0 mm
- Standard Raspberry Pi 40-pin GPIO extension header, compatible with Raspberry Pi series boards and Jetson Nano
- Supports communication protocols: LWM2M, COAP, MQTT, TCP, UDP, HTTP, HTTPS
- Onboard USB interface for power supply or debugging
- Breakout UART control pins for connection with host boards like Arduino and STM32
- Onboard voltage translator, 3.3V by default, switchable to 5V via onboard jumper
- SIM card slot supporting NB-IoT specific cards
- Two LED indicators for easy monitoring of working status
- Baud rate: 300bps to 921600bps (115200bps by default)
- Controlled via AT commands (V.25TER, 3GPP TS 27.007, and SIMCOM AT Commands)
- Includes development resources and manual with examples for Raspberry Pi, Jetson Nano, Arduino, STM32, and Python
- Band: FDD-LTE B1, B3, B5, B8, B20, B28
- Data rate: Uplink ≤ 62.5Kbps, Downlink ≤ 26.15Kbps
- SMS: Text mode and PDU mode (depends on the NB card)
- Power supply: 5V
- Logic level: 5V/3.3V (3.3V by default)
- Overall current in idle mode: ~18mA
- Single module current (VBAT=3.3V): Idle mode: 5.6mA, Sleep mode: 0.4mA, PSM mode: 5µA, eDRX mode: 70µA (eDRX=655.36s)
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.