Description
- 1x Waveshare Power over Ethernet HAT (B) for Raspberry Pi 3B+/4B & 802.3af PoE Network
- 1x PoE HAT (B)
- 1x Standoffs pack
- 56.5 x 65 mm
- Standard Raspberry Pi 40-pin GPIO header, supports Raspberry Pi 3B+/4B
- Power over Ethernet (PoE) capability, 802.3af-compliant
- Fully isolated switched-mode power supply (SMPS)
- 0.91" OLED for monitoring processor temperature, IP address, and fan status in real-time
- Onboard cooling fan with automatic operation on power-up or programmable control, configured by switch
- Integrates PCF8574 IO expander for I2C bus, providing pin P0 for direct fan control and additional spare IO pins
- PoE power input: 37V ~ 57V DC
- PoE power output: 5V 2.5A DC
- OLED resolution: 128×32 pixels
- Network standard: 802.3af PoE
- OLED driver: 1306
- OLED display color: white
- Provides both network connection and power supply for Raspberry Pi in one cable
- Automatically turns on/off cooling fan based on Raspberry Pi processor temperature
- Onboard PCF8574 chip providing 8 IO pins, with P0 for fan control
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.