Description
- 1x Waveshare Raspberry Pi Compute Module 3+ Development Kit Type B (no CM3+, US)
- 1x Compute Module IO Board Plus
- 1x 7inch HDMI LCD (C)
- 1x DS18B20
- 1x IR Remote Controller
- 1x LCD Adapter
- 1x HDMI Cable
- 1x HDMI Adapter
- 1x USB Adapter
- 4x RPi Screws
- 1x 22pin FFC
- 1x RPi Zero V1.3 Camera Cable 15cm
- 1x Power Adapter 5V/3A Micro
- 1x USB Type A Plug to Micro B Plug Cable 35cm
- 2x USB Type A Plug to Micro B Plug Cable 120cm
- 2x Jumper Wire 4-pin to Separated Pins
- 2x Jumper Wire 2-pin 2.54-pitch 200mm
- Broadcom BCM2837B0
- Cortex-A53 (ARMv8) 64-bit SoC at 1.2GHz
- 1GB RAM
- eMMC Flash
- 200-pin SODIMM connector with 35U hard gold plating I/O pins
- 48 GPIO
- 2 I2C
- 2 SPI
- 2 UART
- 2 SD/SDIO (1 SD used for eMMC Flash on non-Lite variants)
- 1 HDMI 1.3a
- 1 USB2 HOST/OTG
- 1 DPI (parallel RGB display)
- 1 NAND (SMI)
- 1 4-lane CSI Camera Interface (up to 1Gbps per lane)
- 1 2-lane CSI Camera Interface (up to 1Gbps per lane)
- 1 4-lane DSI Display Interface (up to 1Gbps per lane)
- 1 2-lane DSI Display Interface (up to 1Gbps per lane)
- Supports multiple operating systems, including Windows 10 (the free IoT-specific version from Microsoft)
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.