Description
- 1x Waveshare RM520N-GL 5G HAT for Raspberry Pi w/ Case, Quad Antennas LTE-A, GNSS, 3GPP 16, 4G/3G (US)
- 1x Protection case kit
- 1x M.2 to 4G/5G HAT
- 1x RM520N-GL
- 1x GNSS antenna
- 1x 2*20pin pin header
- 1x 5V 3A Type-C power adapter
- 1x Dual plug USB3.0 cable
- 1x USB3.0 adapter
- 1x USB2.0 adapter
- 1x Screws pack
- 4x Antenna
- 4x IPEX adapter cable
- 4x SMA protective cap
- 30.0 x 52.0 x 2.3 mm
- Supports 3GPP 5G Release 16 Specification, M.2 Form Factor
- Supports 5G/4G/3G Networking, Global Band
- Supports 5G NSA (4G and 5G Co-Networking) and SA (5G Standalone Networking)
- Multi-Constellation High-Precision GNSS: Supports GPS, Beidou, Glonass, Galileo, QZSS
- USB 3.1 port (USB 2.0 compatible) for high-speed 5G network
- Standard M.2 B KEY slot, compatible with SIM7600X/EM06X/SIM82XX/RM5XX series 4G/5G M.2 modules
- Onboard control pins, built-in voltage level translator, enabled via DIP switch
- Onboard USB-C connector for standalone power supply
- Onboard power supply switch, reset button, and LED indicator
- Two SIM card slots, dual card single standby, switchable via AT command
- High-efficiency power supply circuit, up to 3A output current
- Metal case, supports wall and rail mounting
- Operating temperature: -30 °C to +75 °C
- Extension temperature: -40 °C to +85 °C
- Power supply: 3~4 V, typical 3.7 V
- Power consumption: 90 μA at shutdown, 3.7 mA at hibernate, TBD at USB 2.0, idle, TBD at USB 3.0, idle
- Frequency Band: 5G NR, LTE-FDD, LTE-TDD, UMTS WCDMA
- Data Rate: 5G mmWave downlink 4 Gbps; uplink 1.4 Gbps, 5G SA Sub-6 downlink 2 Gbps; uplink 1 Gbps
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.