Description
- 1x Waveshare SIM7600NA-H 4G HAT for Raspberry Pi, LTE Cat-4 4G Support (NA)
- 1x SMA Antenna
- 1x GPS External Antenna (A)
- 2x USB Type A plug to micro plug cable
- 2x RPi screws pack

- 56 x 65 mm (L x W)
- Standard Raspberry Pi 40-pin GPIO extension header
- Supports GPS, BeiDou, GLONASS, GALILEO, QZSS, and LBS base station positioning
- Onboard USB interface for testing AT commands and GPS positioning data
- Onboard CP2102 USB to UART converter for serial debugging
- SIM card slot supporting 1.8V/3V SIM cards
- Onboard audio jack and audio decoder for making telephone calls
- Two LED indicators for monitoring operating status
- Onboard voltage translator, configurable to 3.3V or 5V
- Baud rate: 300 bps to 4 Mbps (default: 115200 bps)
- Autobauding baud rate: 9600 bps to 115200 bps
- Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
- Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
- Frequency band: LTE Cat-4, LTE-FDD: B2/B4/B5/B12/B13/B14/B25/B26/B66/B71, LTE-TDD: B41
- GNSS receiver type: 16-channel
- Sensitivity: -159 dBm (GPS) / -158 dBm (GLONASS)
- Power supply: 5V
- Operating voltage: 5V / 3.3V (configured via jumper)
- Operating temperature: -30 to 80 °C
- Storage temperature: -45 to 90 °C
- Compatible with Raspberry Pi series boards and Jetson Nano
- Weight: 190 g
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.
