Description
- 1 x BlueRobotics Newton Gripper with Pre-installed Cable Penetrator
- 1 x Penetrator Nut
- 1 x Penetrator O-ring
- 1 x Newton Gripper Mounting Clamps and Thumbscrew
- 2 x Newton Gripper Mounting Clamp Screws
Electrical
- Supply Voltage (Vin): 9 - 18 volts
- PWM Logic Voltage: 3.3 volts
- PWM Neutral Signal: 1500 μs
- PWM Open Signal: >1530 μs-1900 μs
- PWM Close Signal: <1470 μs-1100 μs
- Peak Current: 6 amps
Mechanical
- Grip Force (at tip): 97N, 22lbf
- Grip Force (in middle): 124N, 28lbf
- Linear Piston Travel: 15mm, 0.59in
- Jaw Opening: 70mm, 2.75 in
- Time to Open/Close: 1.6 secs
Cable
- Cable Diameter: 3.8 mm, 0.15 in
- Cable Length: 635 mm, 25 in
- Cable Jacket: Black Urethane
- Conductor Insulation: Acid-Etched FEP
- Conductor Gauge: 20 AWG
- Wires Black - Ground, Red - Power, Yellow - Signal
Physical
- Pressure Rating1: 300 m, 984 ft
- Overall Length (Closed): 294 mm, 11.57 in
- Overall Length (Open): 300 mm, 11.81 in
- Body Primary Diameter: 35 mm, 1.38 in
- Bracket Mounting Hole Spacing: 16 mm, 0.63 in
- Bracket Screw Size: M5x0.4
- Weight in Air (w/ cable): 616 g, 21.9 oz
- Weight in Water (w cable): 260 g, 9.2 oz
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.

